HVAC Services in Bremerton, WA
Repairs, replacements, heat pumps, ductless, gas piping and water heaters for Bremerton and Kitsap County — every job diagnosed first and quoted in writing.
- Free written estimates
- No-heat calls first
- Manual J sizing
Urgent repair or planned project?
A failed system needs safe next steps and a clear diagnosis
Check the thermostat, filter and breaker, photograph any error code, and call (831) 461-3437. Gas smell? Leave first and call 911 or your gas utility from outside. Start with no heat repair or emergency HVAC repair.
A replacement needs sizing, permits and a written scope
Equipment matched to a load calculation, duct and electrical checks, permit and rebate verification, warranty terms and exclusions, all in writing. Start with HVAC installation and replacement or heat pump installation.
Reviewed .
Installation & Maintenance
Heat pumps, ductless, furnaces, AC and seasonal tune-ups.
Choose these when you’re planning: a new heat pump or furnace, cooling for the next heat wave, or a tune-up before the season turns. Each starts with an assessment and a written scope sized with a Manual J load calculation.
HVAC Installation & Replacement
A full heating and cooling replacement planned around a real load calculation, your ducts and your panel, so the new system fits the house, not the old nameplate.
HVAC Installation detailsHeat Pump Installation
Ducted and hybrid heat pumps sized for Kitsap’s long, damp heating season, with backup heat, defrost drainage and panel capacity worked out before install day.
Heat Pump Installation detailsDuctless Mini-Split Installation
Quiet, room-by-room heating and cooling for homes without ducts, including installs of units you’ve already purchased, done with proper vacuum, charge and drainage.
Ductless Mini-Splits detailsFurnace Installation
New gas and electric furnaces set up with correct venting, gas pressure and airflow, including electric-to-gas conversions and code-compliant garage installs.
Furnace Installation detailsAir Conditioner Installation
Cooling that keeps windows shut through heat waves and smoky August weeks, matched to your furnace and ducts, or delivered by a heat pump that also heats.
AC Installation detailsHVAC Maintenance & Tune-Ups
Seasonal tune-ups that catch weak igniters, clogged coils and venting problems before the first cold snap, with checks tailored to furnaces, heat pumps and gas fireplaces.
HVAC Maintenance details
Repair & Emergency
No heat, no cooling, failed blowers and breakdowns.
Choose these when something has stopped working or doesn’t feel safe. Every repair starts with a confirmed diagnosis, and you see the failed part and the test that proved it before any replacement talk.
Emergency HVAC Repair
When the heat quits during a freeze or equipment starts smelling wrong, get clear safety steps and a technician who diagnoses the real cause before replacing anything.
Emergency HVAC Repair detailsFurnace Repair
Honest furnace diagnostics for Bremerton homes: we find why the igniter, blower or limit switch failed, fix the cause, and tell you straight whether repair still makes sense.
Furnace Repair detailsHeat Pump Repair
Weak heat, a frozen outdoor coil or a system stuck on costly heat strips? We find the fault, from defrost boards to refrigerant leaks, and fix it.
Heat Pump Repair detailsNo Heat Repair
House going cold? We troubleshoot furnaces, heat pumps and mini-splits, restore safe heat, and explain exactly what failed before any repair begins.
No Heat Repair detailsAC Repair
Cooling quit during the first hot week of the year? We repair central AC, heat pumps and mini-splits, finding the real fault instead of just adding refrigerant.
AC Repair details
Gas, Ducts & Water Heat
Gas piping, duct cleaning, fireplaces and water heaters.
The systems that share your furnace’s gas line, flue and ducts: gas piping, gas fireplaces, water heaters and duct cleaning. Handling them together catches venting and gas-supply problems that single-trade visits miss.
Gas Piping & Gas Line Installation
Adding a gas range, fireplace or furnace? We size, install and pressure test gas piping to code, with the permit pulled and every joint checked before gas flows.
Gas Line Installation detailsAir Duct Cleaning
Source-removal duct cleaning under negative pressure, plus an honest answer on whether your ducts need it or whether a crawl space fix matters more.
Duct Cleaning detailsGas Fireplace Service
Pilot won’t stay lit, glass clouded, or flames look wrong? We repair, clean and safety-inspect gas fireplaces and inserts so they’re ready for rainy-season evenings.
Gas Fireplace Service detailsWater Heater Service
No hot water or a leaking tank? We repair and replace gas and electric water heaters, strapped and vented to Washington code, with permits handled properly.
Water Heater Service details
Damp air, musty smells and uneven rooms
Not every comfort problem needs new equipment. With about 45 inches of rain a year, many Bremerton homes have sweating crawl-space ducts, clogged condensate lines or disconnected runs. We look for the moisture source first, then choose between duct cleaning and repair, sealing and insulation, better filtration or ventilation, or a maintenance visit. See damp crawl spaces and your ducts.
Not sure where to start?
Find the right service in three questions
Answer a few questions about what’s happening and what heats your home, and we’ll point you to the right starting page. It’s the same check a technician runs on the phone.
Every visit follows the same process: diagnose, explain, give written options, then work only with your authorization. Read how we work, or see typical Bremerton HVAC costs before you call.
FAQ
Choosing the right HVAC service
I’m not sure which service I need. What should I book?
Book by symptom, not by part. If something has stopped working or smells wrong, call and we’ll start with a diagnosis. If it runs but the house is uneven, damp or expensive to heat, a maintenance visit or assessment usually finds the cause. If you’re planning an upgrade, request an installation estimate. The quick check on this page points you to the right starting page.
What’s the difference between a repair visit and a replacement assessment?
A repair visit finds and fixes a specific failure. We confirm the failed part with a test, explain it and repair it once you approve. A replacement assessment is an evidence-gathering visit: equipment condition, ducts, crawl space, electrical capacity and a Manual J load calculation, followed by a written scope with permits, rebate checks, warranty terms and exclusions.
How often should HVAC systems be serviced in Bremerton?
Plan a heating check before the fall rains and a cooling check before summer heat waves. A heat pump that does both jobs benefits from both visits. Homes with damp crawl spaces, heavy tree cover or salt-air exposure need coils, condensate lines and outdoor units looked at more closely. The manufacturer’s requirements set the minimum for keeping a warranty valid.
Get your free written estimate
Call or text and we’ll give you an honest arrival window — no-heat calls go to the front of the line.
- Free written estimates
- No-heat calls first
- Manual J sizing